Coated Manual Bollard

Product İnfo;

We may manufacture our bollards in any dimensions. Our product standard dimensions are 210-220mm outer diameter and 500 mm raising section. The whole surface of the bollards are stoned and furnished.  This reflector stripe makes the bollards more visible by the drivers. There is a special type of painting used for the bollards. First of all, the bollards are being hot dipped galvanized. These bollards have imbedded solar buttons and inside the buttons, the LED lights are visible at night. Compare to the usage of other hydraulic and pneumatic bollards, this product has a manual usage method. The linchpin should be operated manual and bollard should be pressed down. When the bollard lid reaches to the ground level, the linchpin should be turned against to the clockwise to be locked. To raise the bollard back up again, should be pressed on the bollard and turn the key to clockwise. With the help of the leverage mechanism inside the bollard, bollard would rise until the chosen height and lock itself. Excluding the standard production dimensions, it is possible to produce any size of bollards according to the producer’s specifications. Painted Manual Rising Bollard can be produced according to the requirements in any dimension. Our standard production has a red color reflector tape at the top section. At the top of the lid there is the key. The body color is yellow and the paint type is Rall 1028.